Registration Code For Red Alert 3 Keygen ~REPACK~

Registration Code For Red Alert 3 Keygen ~REPACK~

DOWNLOAD >>>>> https://urllio.com/2t2yLN

Do you know something about the registration code of ra3 uprising because everytime i rumthe game it is requesting for the registration code but i dont have any, can you pleasehelp me with this? Thanks

Command & Conquer Red Alert 3Command & Conquer Red Alert 3 UprisingCommand and Conquer Red Alert 3: UprisingRed Alert 3Red Alert 3 UprisingCommand & Conquer: Red Alert 3 (BETA KEY)Command & Conquer Red Alert 3 BETARed Alert Command And Conquer 3Command & Conquer Red Alert 2Command & conquer Red Alert 2: Yuri RevengeCommand & Conquer Red Alert 2: Yuri's RevengeCommand&Conquer Red Alert 2 (Works 100%)Red Alert 2Red Alert 2 Yuri's RevengeRed Alert 2(origial)C & C Red Alert 2 Yuris RevengeC&C Red Alert 2: Yuri's Revengec&c red alertCommand And Conquer Red Alert 2 (not for online use)Red alert 2 online key!Hamachi Red Alert 2 and YuriRed alert 2 expansion_yuris revengeAdware ALERT 3.6.2.1Cyber Alert 3.96PCDJ Red 5.3Red Giant Red Giant Trapcode Starglow v1.6Family Cyber Alert v2.3Red Giant Magic Bullet Looks v1.4.3Red Giant Trapcode Form 1.0.3Red Giant Magic Bullet Quick Looks v1.3Red Giant Trapcode Sound Keys v1.1.3PCdj red 3.5Red Giant PlaneSpace v1.3Red Call Recorder 1.0.0.3ElectraSoft First Alert Service Monitor v10.09.01ElectraSoft First Alert Service Monitor v10.12.01ElectraSoft First Alert Service Monitor v12.02.01Electrasoft First Alert Service Monitor v11.08.01First Alert Service Monitor v10.10.14ElectraSoft First Alert Service Monitor v10.05.01First Alert Service Monitor 9.85.01First Alert Service Monitor v9.95.01ElectraSoft First Alert Service Monitor v11.06.01First Alert Service Monitor v07.09.01First Alert Service Monitor v9.95.03First Alert Service Monitor 9.81.01First Alert Service Monitor v9.91.01ElectraSoft First Alert Service Monitor v11.07.01First Alert Service Monitor 9.80.09First Alert Service Monitor v9.96.01ElectraSoft First Alert Service Monitor v11.02.12ElectraSoft First Alert Service Monitor v11.01.26First Alert Service Monitor v10.01.01Electrasoft First Alert Service Monitor v09.06.17Electrasoft First Alert Service Monitor v12.04.11First Alert Service Monitor 9.86.01First Alert Service Monitor 9.84.15ElectraSoft First Alert Service Monitor v11.12.01Electrasoft First Alert Service Monitor v09.05.24ElectraSoft First Alert Service Monitor v09.10.01First Alert Service Monitor v9.93.01First Alert Service Monitor 9.77.01First Alert Service Monitor v07.09.07First Alert Service Monitor 9.75.01First Alert Service Monitor 9.76.01Family Cyber Alert v3.6First Alert Service Monitor v9.94.01FIRST ALERT SERVICE MONITOR V08.04.01Theft alertFamily Cyber Alert v3.95Family Cyber Alert v3.4First Alert Service Monitor 9.82.01First Alert Service Monitor 9.84.01Ads Alert 2.6ElectraSoft First Alert Service Monitor v10.02.16Ads Alert 2.60ElectraSoft First Alert Service Monitor v11.03.28First Alert Service Monitor 9.83.01First Alert Service Monitor 9.80.01Family Cyber Alert v2.2Family Cyber Alert v3.9ElectraSoft First Alert Service Monitor v11.09.01Family Cyber Alert v3.7PCPrivacySoftware Ads Alert v3.10Family Cyber Alert v3.5PCPrivacySoftware Ads Alert 2.5PCPrivacySoftware Ads Alert 2.8First Alert Service Monitor 9.78.01First Alert Service Monitor 9.79.01First Alert Service Monitor v9.87.01First Alert Service Monitor v9.88.01PCPrivacySoftware Ads Alert 2.25ElectraSoft First Alert Service Monitor v10.10.01ElectraSoft First Alert Service Monitor v11.04.17ElectraSoft First Alert Service Monitor v10.04.01PCPrivacySoftware Ads Alert v3.0Red Giant Magic Bullet Looks v1.2Red Giant Magic Bullet Suite 2.0.forRed Giant Trapcode Particular v1.5.1Pcdj Red 5.2

FortiGuard services can be purchased individually or in bundles. After you've registered your FortiWeb (see Registering your FortiWeb), contact your reseller with the model of your FortiWeb and the services or bundled you would like. Upon purchasing services from your reseller, you will receive the service registration document by email which also includes the service in title and summary containing your contractor registration code. Here are the next steps:

/** * Copyright (c) 2012 - 2021, Nordic Semiconductor ASA * * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form, except as embedded into a Nordic * Semiconductor ASA integrated circuit in a product or a software update for * such product, must reproduce the above copyright notice, this list of * conditions and the following disclaimer in the documentation and/or other * materials provided with the distribution. * * 3. Neither the name of Nordic Semiconductor ASA nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * 4. This software, with or without modification, must only be used with a * Nordic Semiconductor ASA integrated circuit. * * 5. Any software provided in binary form under this license must not be reverse * engineered, decompiled, modified and/or disassembled. * * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *//** @file * * @defgroup ble_sdk_app_hids_keyboard_main main.c * @{ * @ingroup ble_sdk_app_hids_keyboard * @brief HID Keyboard Sample Application main file. * * This file contains is the source code for a sample application using the HID, Battery and Device * Information Services for implementing a simple keyboard functionality. * Pressing Button 0 will send text 'hello' to the connected peer. On receiving output report, * it toggles the state of LED 2 on the mother board based on whether or not Caps Lock is on. * This application uses the @ref app_scheduler. * * Also it would accept pairing requests from any peer device. */#include #include #include "nordic_common.h"#include "nrf.h"#include "nrf_assert.h"#include "app_error.h"#include "ble.h"#include "ble_err.h"#include "ble_hci.h"#include "ble_srv_common.h"#include "ble_advertising.h"#include "ble_advdata.h"#include "ble_hids.h"#include "ble_bas.h"#include "ble_dis.h"#include "ble_conn_params.h"#include "sensorsim.h"#include "bsp_btn_ble.h"#include "app_scheduler.h"#include "nrf_sdh.h"#include "nrf_sdh_soc.h"#include "nrf_sdh_ble.h"#include "app_timer.h"#include "app_uart.h"#include "app_util_platform.h"#include "peer_manager.h"#include "fds.h"#include "ble_conn_state.h"#include "nrf_ble_gatt.h"#include "nrf_ble_qwr.h"#include "nrf_pwr_mgmt.h"#include "peer_manager_handler.h"#if defined (UART_PRESENT)#include "nrf_uart.h"#endif#if defined (UARTE_PRESENT)#include "nrf_uarte.h"#endif#include "nrf_log.h"#include "nrf_log_ctrl.h"#include "nrf_log_default_backends.h"#include "nrf_delay.h"//********************************************************************************************************#define APP_BLE_CONN_CFG_TAG 1 /**< A tag identifying the SoftDevice BLE configuration. *///********************************************************************************************************#define SHIFT_BUTTON_ID 1 /**< Button used as 'SHIFT' Key. */#define DEVICE_NAME "TVS_WIRELESS_SERIAL" /**< Name of device. Will be included in the advertising data. */#define MANUFACTURER_NAME "NordicSemiconductor" /**< Manufacturer. Will be passed to Device Information Service. *///********************************************************************************************************#define NUS_SERVICE_UUID_TYPE BLE_UUID_TYPE_VENDOR_BEGIN /**< UUID type for the Nordic UART Service (vendor specific). *///********************************************************************************************************#define APP_BLE_OBSERVER_PRIO 3 /**< Application's BLE observer priority. You shouldn't need to modify this value. */#define APP_BLE_CONN_CFG_TAG 1 /**< A tag identifying the SoftDevice BLE configuration. *///**********************************************************************************************************#define APP_ADV_INTERVAL 66 /**< The advertising interval (in units of 0.625 ms. This value corresponds to 40 ms). */#define APP_ADV_DURATION 0 /**< The advertising duration (180 seconds) in units of 10 milliseconds. *///***********************************************************************************************************#define BATTERY_LEVEL_MEAS_INTERVAL APP_TIMER_TICKS(2000) /**< Battery level measurement interval (ticks). */#define MIN_BATTERY_LEVEL 81 /**< Minimum simulated battery level. */#define MAX_BATTERY_LEVEL 100 /**< Maximum simulated battery level. */#define BATTERY_LEVEL_INCREMENT 1 /**< Increment between each simulated battery level measurement. */#define PNP_ID_VENDOR_ID_SOURCE 0x02 /**< Vendor ID Source. */#define PNP_ID_VENDOR_ID 0x1915 /**< Vendor ID. */#define PNP_ID_PRODUCT_ID 0xEEEE /**< Product ID. */#define PNP_ID_PRODUCT_VERSION 0x0001 /**< Product Version. */#define APP_ADV_FAST_INTERVAL 0x0028 /**< Fast advertising interval (in units of 0.625 ms. This value corresponds to 25 ms.). */#define APP_ADV_SLOW_INTERVAL 0x0C80 /**< Slow advertising interval (in units of 0.625 ms. This value corrsponds to 2 seconds). */#define APP_ADV_FAST_DURATION 3000 /**< The advertising duration of fast advertising in units of 10 milliseconds. */#define APP_ADV_SLOW_DURATION 18000 /**< The advertising duration of slow advertising in units of 10 milliseconds. *//*lint -emacro(524, MIN_CONN_INTERVAL) // Loss of precision */#define MIN_CONN_INTERVAL MSEC_TO_UNITS(7.5, UNIT_1_25_MS) /**< Minimum connection interval (7.5 ms) */#define MAX_CONN_INTERVAL MSEC_TO_UNITS(30, UNIT_1_25_MS) /**< Maximum connection interval (30 ms). */#define SLAVE_LATENCY 6 /**< Slave latency. */#define CONN_SUP_TIMEOUT MSEC_TO_UNITS(430, UNIT_10_MS) /**< Connection supervisory timeout (430 ms). */#define FIRST_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(5000) /**< Time from initiating event (connect or start of notification) to first time sd_ble_gap_conn_param_update is called (5 seconds). */#define NEXT_CONN_PARAMS_UPDATE_DELAY APP_TIMER_TICKS(30000) /**< Time between each call to sd_ble_gap_conn_param_update after the first call (30 seconds). */#define MAX_CONN_PARAMS_UPDATE_COUNT 3 /**< Number of attempts before giving up the connection parameter negotiation. */#define SEC_PARAM_BOND 1 /**< Perform bonding. */#define SEC_PARAM_MITM 0 /**< Man In The Middle protection not required. */#define SEC_PARAM_LESC 0 /**< LE Secure Connections not enabled. */#define SEC_PARAM_KEYPRESS 0 /**< Keypress notifications not enabled. */#define SEC_PARAM_IO_CAPABILITIES BLE_GAP_IO_CAPS_NONE /**< No I/O capabilities. */#define SEC_PARAM_OOB 0 /**< Out Of Band data not available. */#define SEC_PARAM_MIN_KEY_SIZE 7 /**< Minimum encryption key size. */#define SEC_PARAM_MAX_KEY_SIZE 16 /**< Maximum encryption key size. */#define OUTPUT_REPORT_INDEX 0 /**< Index of Output Report. */#define OUTPUT_REPORT_MAX_LEN 1 /**< Maximum length of Output Report. */#define INPUT_REPORT_KEYS_INDEX 0 /**< Index of Input Report. */#define OUTPUT_REPORT_BIT_MASK_CAPS_LOCK 0x02 /**< CAPS LOCK bit in Output Report (based on 'LED Page (0x08)' of the Universal Serial Bus HID Usage Tables). */#define INPUT_REP_REF_ID 0 /**< Id of reference to Keyboard Input Report. */#define OUTPUT_REP_REF_ID 0 /**< Id of reference to Keyboard Output Report. */#define FEATURE_REP_REF_ID 0 /**< ID of reference to Keyboard Feature Report. */#define FEATURE_REPORT_MAX_LEN 2 /**< Maximum length of Feature Report. */#define FEATURE_REPORT_INDEX 0 /**< Index of Feature Report. */#define MAX_BUFFER_ENTRIES 150 /**< Number of elements that can be enqueued */#define BASE_USB_HID_SPEC_VERSION 0x0101 /**< Version number of base USB HID Specification implemented by this application. */#define INPUT_REPORT_KEYS_MAX_LEN 8 /**< Maximum length of the Input Report characteristic. */#define DEAD_BEEF 0xDEADBEEF /**< Value used as error code on stack dump, can be used to identify stack location on stack unwind. */#define UART_TX_BUF_SIZE 1024 /**< UART TX buffer size. */#define UART_RX_BUF_SIZE 1024 /**< UART RX buffer size. */#define SCHED_MAX_EVENT_DATA_SIZE APP_TIMER_SCHED_EVENT_DATA_SIZE /**< Maximum size of scheduler events. */#ifdef SVCALL_AS_NORMAL_FUNCTION#define SCHED_QUEUE_SIZE 20 /**< Maximum number of events in the scheduler queue. More is needed in case of Serialization. */#else#define SCHED_QUEUE_SIZE 10 /**< Maximum number of events in the scheduler queue. */#endif#define MODIFIER_KEY_POS 0 /**< Position of the modifier byte in the Input Report. */#define SCAN_CODE_POS 2 /**< The start position of the key scan code in a HID Report. */#define SHIFT_KEY_CODE 0x02 /**< Key code indicating the press of the Shift Key. */#define MAX_KEYS_IN_ONE_REPORT (INPUT_REPORT_KEYS_MAX_LEN - SCAN_CODE_POS)/**< Maximum number of key presses that can be sent in one Input Report. *///USER MACROS//#define A 0x04#define B 0x05#define C 0x06#define D 0x07#define E 0x08#define F 0x09#define G 0x10#define H 0x11#define I 0x12#define J 0x13#define K 0x14#define L 0x15#define M 0x16#define N 0x17#define O 0x18#define P 0x19#define Q 0x20#define R 0x21#define S 0x22#define T 0x23#define U 0x24#define V 0x25#define W 0x26#define X 0x27#define Y 0x28#define Z 0x29/**Buffer queue access macros * * @{ *//** Initialization of buffer list */#define BUFFER_LIST_INIT() \ do \ { \ buffer_list.rp = 0; \ buffer_list.wp = 0; \ buffer_list.count = 0; \ } while (0)/** Provide status of data list is full or not */#define BUFFER_LIST_FULL() \ ((MAX_BUFFER_ENTRIES == buffer_list.count - 1) ? true : false)/** Provides status of buffer list is empty or not */#define BUFFER_LIST_EMPTY() \ ((0 == buffer_list.count) ? true : false)#define BUFFER_ELEMENT_INIT(i) \ do \ { \ buffer_list.buffer[(i)].p_data = NULL; \ } while (0)/** @} *//** Abstracts buffer element */typedef struct hid_key_buffer{ uint8_t data_offset; /**< Max Data that can be buffered for all entries */ uint8_t data_len; /**< Total length of data */ uint8_t * p_data; /**< Scanned key pattern */ ble_hids_t * p_instance; /**< Identifies peer and service instance */} buffer_entry_t;STATIC_ASSERT(sizeof(buffer_entry_t) % 4 == 0);/** Circular buffer list */typedef struct{ buffer_entry_t buffer[MAX_BUFFER_ENTRIES]; /**< Maximum number of entries that can enqueued in the list */ uint8_t rp; /**< Index to the read location */ uint8_t wp; /**< Index to write location */ uint8_t count; /**< Number of elements in the list */} buffer_list_t;STATIC_ASSERT(sizeof(buffer_list_t) % 4 == 0);APP_TIMER_DEF(m_battery_timer_id); /**< Battery timer. */BLE_HIDS_DEF(m_hids, /**< Structure used to identify the HID service. */ NRF_SDH_BLE_TOTAL_LINK_COUNT, INPUT_REPORT_KEYS_MAX_LEN, OUTPUT_REPORT_MAX_LEN, FEATURE_REPORT_MAX_LEN);BLE_BAS_DEF(m_bas); /**< Structure used to identify the battery service. */NRF_BLE_GATT_DEF(m_gatt); /**< GATT module instance. */NRF_BLE_QWR_DEF(m_qwr); /**< Context for the Queued Write module.*/BLE_ADVERTISING_DEF(m_advertising); /**< Advertising module instance. */static bool m_in_boot_mode = false; /**< Current protocol mode. */static uint16_t m_conn_handle = BLE_CONN_HANDLE_INVALID; /**< Handle of the current connection. */static sensorsim_cfg_t m_battery_sim_cfg; /**< Battery Level sensor simulator configuration. */static sensorsim_state_t m_battery_sim_state; /**< Battery Level sensor simulator state. */static bool m_caps_on = false; /**< Variable to indicate if Caps Lock is turned on. */static pm_peer_id_t m_peer_id; /**< Device reference handle to the current bonded central. */static buffer_list_t buffer_list; /**< List to enqueue not just data to be sent, but also related information like the handle, connection handle etc */static ble_uuid_t m_adv_uuids[] = {{BLE_UUID_HUMAN_INTERFACE_DEVICE_SERVICE, BLE_UUID_TYPE_BLE}};////////////////////////////////////////////////////////////////#include #include int data=0;uint8_t b[1000];int flag=0;static uint8_t data_array[]={};uint8_t count=0;uint8_t hid_buf[]={};uint8_t z=0; uint8_t flag_a,flag_b,flag_c,flag_d,flag_e,flag_f,flag_g,flag_h,flag_i,flag_j,flag_k,flag_l,flag_m,flag_n,flag_o,flag_p,flag_q,flag_r,flag_s,flag_t,flag_u,flag_v,flag_w,flag_x,flag_y,flag_z;uint8_t upper_val;uint8_t lower_val;uint8_t num_val;uint8_t ToHidKeyboardScancode(char c){ if(c) { count+=1; } if ((c>='A')&&(c='a')&&(c='1')&&(cevt_id) { case PM_EVT_CONN_SEC_SUCCEEDED: m_peer_id = p_evt->peer_id; break; case PM_EVT_PEERS_DELETE_SUCCEEDED: advertising_start(false); break; case PM_EVT_PEER_DATA_UPDATE_SUCCEEDED: if ( p_evt->params.peer_data_update_succeeded.flash_changed && (p_evt->params.peer_data_update_succeeded.data_id == PM_PEER_DATA_ID_BONDING)) { NRF_LOG_INFO("New Bond, add the peer to the whitelist if possible"); // Note: You should check on what kind of white list policy your application should use. whitelist_set(PM_PEER_ID_LIST_SKIP_NO_ID_ADDR); } break; default: break; }}/**@brief Function for handling Service errors. * * @details A pointer to this function will be passed to each service which may need to inform the * application about an error. * * @param[in] nrf_error Error code containing information about what went wrong. */static void service_error_handler(uint32_t nrf_error){ APP_ERROR_HANDLER(nrf_error);}/**@brief Function for handling advertising errors. * * @param[in] nrf_error Error code containing information about what went wrong. */static void ble_advertising_error_handler(uint32_t nrf_error){ APP_ERROR_HANDLER(nrf_error);}/**@brief Function for performing a battery measurement, and update the Battery Level characteristic in the Battery Service. */static void battery_level_update(void){ ret_code_t err_code; uint8_t battery_level; battery_level = (uint8_t)sensorsim_measure(&m_battery_sim_state, &m_battery_sim_cfg); err_code = ble_bas_battery_level_update(&m_bas, battery_level, BLE_CONN_HANDLE_ALL); if ((err_code != NRF_SUCCESS) && (err_code != NRF_ERROR_BUSY) && (err_code != NRF_ERROR_RESOURCES) && (err_code != NRF_ERROR_FORBIDDEN) && (err_code != NRF_ERROR_INVALID_STATE) && (err_code != BLE_ERROR_GATTS_SYS_ATTR_MISSING) ) { APP_ERROR_HANDLER(err_code); }}/**@brief Function for handling the Battery measurement timer timeout. * * @details This function will be called each time the battery level measurement timer expires. * * @param[in] p_context Pointer used for passing some arbitrary information (context) from the * app_start_timer() call to the timeout handler. */static void battery_level_meas_timeout_handler(void * p_context){ UNUSED_PARAMETER(p_context); battery_level_update();}/**@brief Function for the Timer initialization. * * @details Initializes the timer module. */static void timers_init(void){ ret_code_t err_code; err_code = app_timer_init(); APP_ERROR_CHECK(err_code); // Create battery timer. err_code = app_timer_create(&m_battery_timer_id, APP_TIMER_MODE_REPEATED, battery_level_meas_timeout_handler); APP_ERROR_CHECK(err_code);}/**@brief Function for the GAP initialization. * * @details This function sets up all the necessary GAP (Generic Access Profile) parameters of the * device including the device name, appearance, and the preferred connection parameters. */static void gap_params_init(void){ ret_code_t err_code; ble_gap_conn_params_t gap_conn_params; ble_gap_conn_sec_mode_t sec_mode; BLE_GAP_CONN_SEC_MODE_SET_OPEN(&sec_mode); err_code = sd_ble_gap_device_name_set(&sec_mode, (const uint8_t *)DEVICE_NAME, strlen(DEVICE_NAME)); APP_ERROR_CHECK(err_code); err_code = sd_ble_gap_appearance_set(BLE_APPEARANCE_HID_KEYBOARD); APP_ERROR_CHECK(err_code); memset(&gap_conn_params, 0, sizeof(gap_conn_params)); gap_conn_params.min_conn_interval = MIN_CONN_INTERVAL; gap_conn_params.max_conn_interval = MAX_CONN_INTERVAL; gap_conn_params.slave_latency = SLAVE_LATENCY; gap_conn_params.conn_sup_timeout = CONN_SUP_TIMEOUT; err_code = sd_ble_gap_ppcp_set(&gap_conn_params); APP_ERROR_CHECK(err_code);}/**@brief Function for initializing the GATT module. */static void gatt_init(void){ ret_code_t err_code = nrf_ble_gatt_init(&m_gatt, NULL); APP_ERROR_CHECK(err_code);}/**@brief Function for handling Queued Write Module errors. * * @details A pointer to this function will be passed to each service which may need to inform the * application about an error. * * @param[in] nrf_error Error code containing information about what went wrong. */static void nrf_qwr_error_handler(uint32_t nrf_error){ APP_ERROR_HANDLER(nrf_error);}/**@brief Function for initializing the Queued Write Module. */static void qwr_init(void){ ret_code_t err_code; nrf_ble_qwr_init_t qwr_init_obj = {0}; qwr_init_obj.error_handler = nrf_qwr_error_handler; err_code = nrf_ble_qwr_init(&m_qwr, &qwr_init_obj); APP_ERROR_CHECK(err_code);}/**@brief Function for initializing Device Information Service. */static void dis_init(void){ ret_code_t err_code; ble_dis_init_t dis_init_obj; ble_dis_pnp_id_t pnp_id; pnp_id.vendor_id_source = PNP_ID_VENDOR_ID_SOURCE; pnp_id.vendor_id = PNP_ID_VENDOR_ID; pnp_id.product_id = PNP_ID_PRODUCT_ID; pnp_id.product_version = PNP_ID_PRODUCT_VERSION; memset(&dis_init_obj, 0, sizeof(dis_init_obj)); ble_srv_ascii_to_utf8(&dis_init_obj.manufact_name_str, MANUFACTURER_NAME); dis_init_obj.p_pnp_id = &pnp_id; dis_init_obj.dis_char_rd_sec = SEC_JUST_WORKS; err_code = ble_dis_init(&dis_init_obj); APP_ERROR_CHECK(err_code);}/**@brief Function for initializing Battery Service. */static void bas_init(void){ ret_code_t err_code; ble_bas_init_t bas_init_obj; memset(&bas_init_obj, 0, sizeof(bas_init_obj)); bas_init_obj.evt_handler = NULL; bas_init_obj.support_notification = true; bas_init_obj.p_report_ref = NULL; bas_init_obj.initial_batt_level = 100; bas_init_obj.bl_rd_sec = SEC_JUST_WORKS; bas_init_obj.bl_cccd_wr_sec = SEC_JUST_WORKS; bas_init_obj.bl_report_rd_sec = SEC_JUST_WORKS; err_code = ble_bas_init(&m_bas, &bas_init_obj); APP_ERROR_CHECK(err_code);}/**@brief Function for initializing HID Service. */static void hids_init(void){ ret_code_t err_code; ble_hids_init_t hids_init_obj; ble_hids_inp_rep_init_t * p_input_report; ble_hids_outp_rep_init_t * p_output_report; ble_hids_feature_rep_init_t * p_feature_report; uint8_t hid_info_flags; static ble_hids_inp_rep_init_t input_report_array[1]; static ble_hids_outp_rep_init_t output_report_array[1]; static ble_hids_feature_rep_init_t feature_report_array[1]; static uint8_t report_map_data[] = { 0x05, 0x01, // Usage Page (Generic Desktop) 0x09, 0x06, // Usage (Keyboard) 0xA1, 0x01, // Collection (Application) 0x05, 0x07, // Usage Page (Key Codes) 0x19, 0xe0, // Usage Minimum (224) 0x29, 0xe7, // Usage Maximum (231) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x01, // Logical Maximum (1) 0x75, 0x01, // Report Size (1) 0x95, 0x08, // Report Count (8) 0x81, 0x02, // Input (Data, Variable, Absolute) 0x95, 0x01, // Report Count (1) 0x75, 0x08, // Report Size (8) 0x81, 0x01, // Input (Constant) reserved byte(1) 0x95, 0x05, // Report Count (5) 0x75, 0x01, // Report Size (1) 0x05, 0x08, // Usage Page (Page# for LEDs) 0x19, 0x01, // Usage Minimum (1) 0x29, 0x05, // Usage Maximum (5) 0x91, 0x02, // Output (Data, Variable, Absolute), Led report 0x95, 0x01, // Report Count (1) 0x75, 0x03, // Report Size (3) 0x91, 0x01, // Output (Data, Variable, Absolute), Led report padding 0x95, 0x06, // Report Count (6) 0x75, 0x08, // Report Size (8) 0x15, 0x00, // Logical Minimum (0) 0x25, 0x65, // Logical Maximum (101) 0x05, 0x07, // Usage Page (Key codes) 0x19, 0x00, // Usage Minimum (0) 0x29, 0x65, // Usage Maximum (101) 0x81, 0x00, // Input (Data, Array) Key array(6 bytes) 0x09, 0x05, // Usage (Vendor Defined) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8 bit) 0x95, 0x02, // Report Count (2) 0xB1, 0x02, // Feature (Data, Variable, Absolute) 0xC0 // End Collection (Application) }; memset((void *)input_report_array, 0, sizeof(ble_hids_inp_rep_init_t)); memset((void *)output_report_array, 0, sizeof(ble_hids_outp_rep_init_t)); memset((void *)feature_report_array, 0, sizeof(ble_hids_feature_rep_init_t)); // Initialize HID Service p_input_report = &input_report_array[INPUT_REPORT_KEYS_INDEX]; p_input_report->max_len = INPUT_REPORT_KEYS_MAX_LEN; p_input_report->rep_ref.report_id = INPUT_REP_REF_ID; p_input_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_INPUT; p_input_report->sec.cccd_wr = SEC_JUST_WORKS; p_input_report->sec.wr = SEC_JUST_WORKS; p_input_report->sec.rd = SEC_JUST_WORKS; p_output_report = &output_report_array[OUTPUT_REPORT_INDEX]; p_output_report->max_len = OUTPUT_REPORT_MAX_LEN; p_output_report->rep_ref.report_id = OUTPUT_REP_REF_ID; p_output_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_OUTPUT; p_output_report->sec.wr = SEC_JUST_WORKS; p_output_report->sec.rd = SEC_JUST_WORKS; p_feature_report = &feature_report_array[FEATURE_REPORT_INDEX]; p_feature_report->max_len = FEATURE_REPORT_MAX_LEN; p_feature_report->rep_ref.report_id = FEATURE_REP_REF_ID; p_feature_report->rep_ref.report_type = BLE_HIDS_REP_TYPE_FEATURE; p_feature_report->sec.rd = SEC_JUST_WORKS; p_feature_report->sec.wr = SEC_JUST_WORKS; hid_info_flags = HID_INFO_FLAG_REMOTE_WAKE_MSK | HID_INFO_FLAG_NORMALLY_CONNECTABLE_MSK; memset(&hids_init_obj, 0, sizeof(hids_init_obj)); hids_init_obj.evt_handler = on_hids_evt; hids_init_obj.error_handler = service_error_handler; hids_init_obj.is_kb = true; hids_init_obj.is_mouse = false; hids_init_obj.inp_rep_count = 1; hids_init_obj.p_inp_rep_array = input_report_array; hids_init_obj.outp_rep_count = 1; hids_init_obj.p_outp_rep_array = output_report_array; hids_init_obj.feature_rep_count = 1; hids_init_obj.p_feature_rep_array = feature_report_array; hids_init_obj.rep_map.data_len = sizeof(report_map_data); hids_init_obj.rep_map.p_data = report_map_data; hids_init_obj.hid_information.bcd_hid = BASE_USB_HID_SPEC_VERSION; hids_init_obj.hid_information.b_country_code = 0; hids_init_obj.hid_information.flags = hid_info_flags; hids_init_obj.included_services_count = 0; hids_init_obj.p_included_services_array = NULL; hids_init_obj.rep_map.rd_sec = SEC_JUST_WORKS; hids_init_obj.hid_information.rd_sec = SEC_JUST_WORKS; hids_init_obj.boot_kb_inp_rep_sec.cccd_wr = SEC_JUST_WORKS; hids_init_obj.boot_kb_inp_rep_sec.rd = SEC_JUST_WORKS; hids_init_obj.boot_kb_outp_rep_sec.rd = SEC_JUST_WORKS; hids_init_obj.boot_kb_outp_rep_sec.wr = SEC_JUST_WORKS; hids_init_obj.protocol_mode_rd_sec = SEC_JUST_WORKS; hids_init_obj.protocol_mode_wr_sec = SEC_JUST_WORKS; hids_init_obj.ctrl_point_wr_sec = SEC_JUST_WORKS; err_code = ble_hids_init(&m_hids, &hids_init_obj); APP_ERROR_CHECK(err_code);}/**@brief Function for initializing services that will be used by the application. */static void services_init(void){ qwr_init(); dis_init(); bas_init(); hids_init();}/**@brief Function for initializing the battery sensor simulator. */static void sensor_simulator_init(void){ m_battery_sim_cfg.min = MIN_BATTERY_LEVEL; m_battery_sim_cfg.max = MAX_BATTERY_LEVEL; m_battery_sim_cfg.incr = BATTERY_LEVEL_INCREMENT; m_battery_sim_cfg.start_at_max = true; sensorsim_init(&m_battery_sim_state, &m_battery_sim_cfg);}/**@brief Function for handling a Connection Parameters error. * * @param[in] nrf_error Error code containing information about what went wrong. */static void conn_params_error_handler(uint32_t nrf_error){ APP_ERROR_HANDLER(nrf_error);}/**@brief Function for initializing the Connection Parameters module. */static void conn_params_init(void){ ret_code_t err_code; ble_conn_params_init_t cp_init; memset(&cp_init, 0, sizeof(cp_init)); cp_init.p_conn_params = NULL; cp_init.first_conn_params_update_delay = FIRST_CONN_PARAMS_UPDATE_DELAY; cp_init.next_conn_params_update_delay = NEXT_CONN_PARAMS_UPDATE_DELAY; cp_init.max_conn_params_update_count = MAX_CONN_PARAMS_UPDATE_COUNT; cp_init.start_on_notify_cccd_handle = BLE_GATT_HANDLE_INVALID; cp_init.disconnect_on_fail = false; cp_init.evt_handler = NULL; cp_init.error_handler = conn_params_error_handler; err_code = ble_conn_params_init(&cp_init); APP_ERROR_CHECK(err_code);}/**@brief Function for starting timers. */static void timers_start(void){ ret_code_t err_code; err_code = app_timer_start(m_battery_timer_id, BATTERY_LEVEL_MEAS_INTERVAL, NULL); APP_ERROR_CHECK(err_code);}/**@brief Function for transmitting a key scan Press & Release Notification. * * @warning This handler is an example only. You need to analyze how you wish to send the key * release. * * @param[in] p_instance Identifies the service for which Key Notifications are requested. * @param[in] p_key_pattern Pointer to key pattern. * @param[in] pattern_len Length of key pattern. 0 < pattern_len < 7. * @param[in] pattern_offset Offset applied to Key Pattern for transmission. * @param[out] actual_len Provides actual length of Key Pattern transmitted, making buffering of * rest possible if needed. * @return NRF_SUCCESS on success, NRF_ERROR_RESOURCES in case transmission could not be * completed due to lack of transmission buffer or other error codes indicating reason * for failure. * * @note In case of NRF_ERROR_RESOURCES, remaining pattern that could not be transmitted * can be enqueued \ref buffer_enqueue function. * In case a pattern of 'cofFEe' is the p_key_pattern, with pattern_len as 6 and * pattern_offset as 0, the notifications as observed on the peer side would be * 1> 'c', 'o', 'f', 'F', 'E', 'e' * 2> - , 'o', 'f', 'F', 'E', 'e' * 3> - , -, 'f', 'F', 'E', 'e' * 4> - , -, -, 'F', 'E', 'e' * 5> - , -, -, -, 'E', 'e' * 6> - , -, -, -, -, 'e' * 7> - , -, -, -, -, - * Here, '-' refers to release, 'c' refers to the key character being transmitted. * Therefore 7 notifications will be sent. * In case an offset of 4 was provided, the pattern notifications sent will be from 5-7 * will be transmitted. */ static uint32_t send_key_scan_press_release(ble_hids_t * p_hids, uint8_t * p_key_pattern, uint16_t pattern_len, uint16_t pattern_offset, uint16_t * p_actual_len){ ret_code_t err_code; uint16_t offset; uint16_t data_len; uint8_t data[INPUT_REPORT_KEYS_MAX_LEN]; // HID Report Descriptor enumerates an array of size 6, the pattern hence shall not be any // longer than this. STATIC_ASSERT((INPUT_REPORT_KEYS_MAX_LEN - 2) == 6); ASSERT(pattern_len p_data = p_key_pattern; element->data_offset = offset; element->data_len = pattern_len; buffer_list.count++; buffer_list.wp++; if (buffer_list.wp == MAX_BUFFER_ENTRIES) { buffer_list.wp = 0; } } return err_code;}/**@brief Function to dequeue key scan patterns that could not be transmitted either completely of * partially. * * @warning This handler is an example only. You need to analyze how you wish to send the key * release. * * @param[in] tx_flag Indicative of whether the dequeue should result in transmission or not. * @note A typical example when all keys are dequeued with transmission is when link is * disconnected. * * @return NRF_SUCCESS on success, else an error code indicating reason for failure. */static uint32_t buffer_dequeue(bool tx_flag){ buffer_entry_t * p_element; uint32_t err_code = NRF_SUCCESS; uint16_t actual_len; if (BUFFER_LIST_EMPTY()) { err_code = NRF_ERROR_NOT_FOUND; } else { bool remove_element = true; p_element = &buffer_list.buffer[(buffer_list.rp)]; if (tx_flag) { err_code = send_key_scan_press_release(p_element->p_instance, p_element->p_data, p_element->data_len, p_element->data_offset, &actual_len); // An additional notification is needed for release of all keys, therefore check // is for actual_len data_len and not actual_len < element->data_len if ((err_code == NRF_ERROR_RESOURCES) && (actual_len data_len)) { // Transmission could not be completed, do not remove the entry, adjust next data to // be transmitted p_element->data_offset = actual_len; remove_element = false; } } if (remove_element) { BUFFER_ELEMENT_INIT(buffer_list.rp); buffer_list.rp++; buffer_list.count--; if (buffer_list.rp == MAX_BUFFER_ENTRIES) { buffer_list.rp = 0; } } } return err_code;}/**@brief Function for sending sample key presses to the peer. * * @param[in] key_pattern_len Pattern length. * @param[in] p_key_pattern Pattern to be sent. */static void keys_send(uint8_t key_pattern_len, uint8_t * p_key_pattern){ ret_code_t err_code; uint16_t actual_len; z+=1; err_code = send_key_scan_press_release(&m_hids, p_key_pattern, key_pattern_len, 0, &actual_len); // An additional notification is needed for release of all keys, therefore check // is for actual_len params.char_write.char_id.rep_index; if (report_index == OUTPUT_REPORT_INDEX) { // This code assumes that the output report is one byte long. Hence the following // static assert is made. STATIC_ASSERT(OUTPUT_REPORT_MAX_LEN == 1); err_code = ble_hids_outp_rep_get(&m_hids, report_index, OUTPUT_REPORT_MAX_LEN, 0, m_conn_handle, &report_val); APP_ERROR_CHECK(err_code); if (!m_caps_on && ((report_val & OUTPUT_REPORT_BIT_MASK_CAPS_LOCK) != 0)) { // Caps Lock is turned On. NRF_LOG_INFO("Caps Lock is turned On!"); err_code = bsp_indication_set(BSP_INDICATE_ALERT_3); APP_ERROR_CHECK(err_code); keys_send(sizeof(m_caps_on_key_scan_str), m_caps_on_key_scan_str); m_caps_on = true; } else if (m_caps_on && ((report_val & OUTPUT_REPORT_BIT_MASK_CAPS_LOCK) == 0)) { // Caps Lock is turned Off . NRF_LOG_INFO("Caps Lock is turned Off!"); err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF); APP_ERROR_CHECK(err_code); keys_send(sizeof(m_caps_off_key_scan_str), m_caps_off_key_scan_str); m_caps_on = false; } else { // The report received is not supported by this application. Do nothing. } } }}/**@brief Function for putting the chip into sleep mode. * * @note This function will not return. */static void sleep_mode_enter(void){ ret_code_t err_code; err_code = bsp_indication_set(BSP_INDICATE_IDLE); APP_ERROR_CHECK(err_code); // Prepare wakeup buttons. err_code = bsp_btn_ble_sleep_mode_prepare(); APP_ERROR_CHECK(err_code); // Go to system-off mode (this function will not return; wakeup will cause a reset). err_code = sd_power_system_off(); APP_ERROR_CHECK(err_code);}/**@brief Function for handling HID events. * * @details This function will be called for all HID events which are passed to the application. * * @param[in] p_hids HID service structure. * @param[in] p_evt Event received from the HID service. */static void on_hids_evt(ble_hids_t * p_hids, ble_hids_evt_t * p_evt){ switch (p_evt->evt_type) { case BLE_HIDS_EVT_BOOT_MODE_ENTERED: m_in_boot_mode = true; break; case BLE_HIDS_EVT_REPORT_MODE_ENTERED: m_in_boot_mode = false; break; case BLE_HIDS_EVT_REP_CHAR_WRITE: on_hid_rep_char_write(p_evt); break; case BLE_HIDS_EVT_NOTIF_ENABLED: break; default: // No implementation needed. break; }}/**@brief Function for handling advertising events. * * @details This function will be called for advertising events which are passed to the application. * * @param[in] ble_adv_evt Advertising event. */static void on_adv_evt(ble_adv_evt_t ble_adv_evt){ ret_code_t err_code; switch (ble_adv_evt) { case BLE_ADV_EVT_DIRECTED_HIGH_DUTY: NRF_LOG_INFO("High Duty Directed advertising."); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_DIRECTED); APP_ERROR_CHECK(err_code); break; case BLE_ADV_EVT_DIRECTED: NRF_LOG_INFO("Directed advertising."); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_DIRECTED); APP_ERROR_CHECK(err_code); break; case BLE_ADV_EVT_FAST: NRF_LOG_INFO("Fast advertising."); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING); APP_ERROR_CHECK(err_code); break; case BLE_ADV_EVT_SLOW: NRF_LOG_INFO("Slow advertising."); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_SLOW); APP_ERROR_CHECK(err_code); break; case BLE_ADV_EVT_FAST_WHITELIST: NRF_LOG_INFO("Fast advertising with whitelist."); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST); APP_ERROR_CHECK(err_code); break; case BLE_ADV_EVT_SLOW_WHITELIST: NRF_LOG_INFO("Slow advertising with whitelist."); err_code = bsp_indication_set(BSP_INDICATE_ADVERTISING_WHITELIST); APP_ERROR_CHECK(err_code); break; case BLE_ADV_EVT_IDLE: sleep_mode_enter(); break; case BLE_ADV_EVT_WHITELIST_REQUEST: { ble_gap_addr_t whitelist_addrs[BLE_GAP_WHITELIST_ADDR_MAX_COUNT]; ble_gap_irk_t whitelist_irks[BLE_GAP_WHITELIST_ADDR_MAX_COUNT]; uint32_t addr_cnt = BLE_GAP_WHITELIST_ADDR_MAX_COUNT; uint32_t irk_cnt = BLE_GAP_WHITELIST_ADDR_MAX_COUNT; err_code = pm_whitelist_get(whitelist_addrs, &addr_cnt, whitelist_irks, &irk_cnt); APP_ERROR_CHECK(err_code); NRF_LOG_DEBUG("pm_whitelist_get returns %d addr in whitelist and %d irk whitelist", addr_cnt, irk_cnt); // Set the correct identities list (no excluding peers with no Central Address Resolution). identities_set(PM_PEER_ID_LIST_SKIP_NO_IRK); // Apply the whitelist. err_code = ble_advertising_whitelist_reply(&m_advertising, whitelist_addrs, addr_cnt, whitelist_irks, irk_cnt); APP_ERROR_CHECK(err_code); } break; //BLE_ADV_EVT_WHITELIST_REQUEST case BLE_ADV_EVT_PEER_ADDR_REQUEST: { pm_peer_data_bonding_t peer_bonding_data; // Only Give peer address if we have a handle to the bonded peer. if (m_peer_id != PM_PEER_ID_INVALID) { err_code = pm_peer_data_bonding_load(m_peer_id, &peer_bonding_data); if (err_code != NRF_ERROR_NOT_FOUND) { APP_ERROR_CHECK(err_code); // Manipulate identities to exclude peers with no Central Address Resolution. identities_set(PM_PEER_ID_LIST_SKIP_ALL); ble_gap_addr_t * p_peer_addr = &(peer_bonding_data.peer_ble_id.id_addr_info); err_code = ble_advertising_peer_addr_reply(&m_advertising, p_peer_addr); APP_ERROR_CHECK(err_code); } } } break; //BLE_ADV_EVT_PEER_ADDR_REQUEST default: break; }}/**@brief Function for handling BLE events. * * @param[in] p_ble_evt Bluetooth stack event. * @param[in] p_context Unused. */static void ble_evt_handler(ble_evt_t const * p_ble_evt, void * p_context){ ret_code_t err_code; switch (p_ble_evt->header.evt_id) { case BLE_GAP_EVT_CONNECTED: NRF_LOG_INFO("Connected"); err_code = bsp_indication_set(BSP_INDICATE_CONNECTED); APP_ERROR_CHECK(err_code); m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle; err_code = nrf_ble_qwr_conn_handle_assign(&m_qwr, m_conn_handle); APP_ERROR_CHECK(err_code); break; case BLE_GAP_EVT_DISCONNECTED: NRF_LOG_INFO("Disconnected"); sd_nvic_SystemReset(); // Dequeue all keys without transmission. (void) buffer_dequeue(false); m_conn_handle = BLE_CONN_HANDLE_INVALID; // Reset m_caps_on variable. Upon reconnect, the HID host will re-send the Output // report containing the Caps lock state. m_caps_on = false; // disabling alert 3. signal - used for capslock ON err_code = bsp_indication_set(BSP_INDICATE_ALERT_OFF); APP_ERROR_CHECK(err_code); break; // BLE_GAP_EVT_DISCONNECTED case BLE_GAP_EVT_PHY_UPDATE_REQUEST: { NRF_LOG_DEBUG("PHY update request."); ble_gap_phys_t const phys = { .rx_phys = BLE_GAP_PHY_AUTO, .tx_phys = BLE_GAP_PHY_AUTO, }; err_code = sd_ble_gap_phy_update(p_ble_evt->evt.gap_evt.conn_handle, &phys); APP_ERROR_CHECK(err_code); } break; case BLE_GATTS_EVT_HVN_TX_COMPLETE: // Send next key event (void) buffer_dequeue(true); break; case BLE_GATTC_EVT_TIMEOUT: // Disconnect on GATT Client timeout event. NRF_LOG_DEBUG("GATT Client Timeout."); err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gattc_evt.conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); APP_ERROR_CHECK(err_code); break; case BLE_GATTS_EVT_TIMEOUT: // Disconnect on GATT Server timeout event. NRF_LOG_DEBUG("GATT Server Timeout."); err_code = sd_ble_gap_disconnect(p_ble_evt->evt.gatts_evt.conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); APP_ERROR_CHECK(err_code); break; default: // No implementation needed. break; }}/**@brief Function for initializing the BLE stack. * * @details Initializes the SoftDevice and the BLE event interrupt. */static void ble_stack_init(void){ ret_code_t err_code; err_code = nrf_sdh_enable_request(); APP_ERROR_CHECK(err_code); // Configure the BLE stack using the default settings. // Fetch the start address of the application RAM. uint32_t ram_start = 0; err_code = nrf_sdh_ble_default_cfg_set(APP_BLE_CONN_CFG_TAG, &ram_start); APP_ERROR_CHECK(err_code); // Enable BLE stack. err_code = nrf_sdh_ble_enable(&ram_start); APP_ERROR_CHECK(err_code); // Register a handler for BLE events. NRF_SDH_BLE_OBSERVER(m_ble_observer, APP_BLE_OBSERVER_PRIO, ble_evt_handler, NULL);}/**@brief Function for the Event Scheduler initialization. */static void scheduler_init(void){ APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, SCHED_QUEUE_SIZE);}/**@brief Function for handling events from the BSP module. * * @param[in] event Event generated by button press. */static void bsp_event_handler(bsp_event_t event){ uint32_t err_code; static uint8_t * p_key = m_sample_key_press_scan_str; static uint8_t size = 0; switch (event) { case BSP_EVENT_SLEEP: sleep_mode_enter(); break; case BSP_EVENT_DISCONNECT: err_code = sd_ble_gap_disconnect(m_conn_handle, BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION); if (err_code != NRF_ERROR_INVALID_STATE) { APP_ERROR_CHECK(err_code); } break; case BSP_EVENT_WHITELIST_OFF: if (m_conn_handle == BLE_CONN_HANDLE_INVALID) { err_code = ble_advertising_restart_without_whitelist(&m_advertising); if (err_code != NRF_ERROR_INVALID_STATE) { APP_ERROR_CHECK(err_code); } } break; case BSP_EVENT_KEY_0: if (m_conn_handle != BLE_CONN_HANDLE_INVALID) { keys_send(1, p_key); p_key++; size++; if (size == MAX_KEYS_IN_ONE_REPORT) { p_key = m_sample_key_press_scan_str; size = 0; } } break; default: break; }}//************************************************************************************************************/**@brief Function for handling app_uart events. * * @details This function will receive a single character from the app_uart module and append it to * a string. The string will be be sent over BLE when the last character received was a * 'new line' '\n' (hex 0x0A) or if the string has reached the maximum data length. *//**@snippet [Handling the data received over UART] */void uart_event_handle(app_uart_evt_t * p_event){ //static uint8_t data_array; static uint8_t i = 0; uint32_t err_code; switch (p_event->evt_type) { case APP_UART_DATA_READY: UNUSED_VARIABLE(app_uart_get(&data_array[i])); printf("character:%c\r\n",data_array[i]); b[data]= ToHidKeyboardScancode(data_array[i]); data++; flag=1; break; case APP_UART_COMMUNICATION_ERROR: APP_ERROR_HANDLER(p_event->data.error_communication); break; case APP_UART_FIFO_ERROR: APP_ERROR_HANDLER(p_event->data.error_code); break; default: memset(b,0,sizeof(b)); break; } }/**@snippet [Handling the data received over UART] *//**@brief Function for initializing the UART module. *//**@snippet [UART Initialization] */static void uart_init(void){ uint32_t err_code; app_uart_comm_params_t const comm_params = { .rx_pin_no = 9,//RX_PIN_NUMBER, .tx_pin_no = 6,//TX_PIN_NUMBER, .rts_pin_no = 10,//RTS_PIN_NUMBER, .cts_pin_no = 11,//CTS_PIN_NUMBER, .flow_control = APP_UART_FLOW_CONTROL_DISABLED, .use_parity = false,#if defined (UART_PRESENT) .baud_rate = NRF_UART_BAUDRATE_9600#else .baud_rate = NRF_UARTE_BAUDRATE_9600#endif }; APP_UART_FIFO_INIT(&comm_params, UART_RX_BUF_SIZE, UART_TX_BUF_SIZE, uart_event_handle, APP_IRQ_PRIORITY_LOWEST, err_code); APP_ERROR_CHECK(err_code);}/**@snippet [UART Initialization] *///**********************************************************************************************/**@brief Function for the Peer Manager initialization. */static void peer_manager_init(void){ ble_gap_sec_params_t sec_param; ret_code_t err_code; err_code = pm_init(); APP_ERROR_CHECK(err_code); memset(&sec_param, 0, sizeof(ble_gap_sec_params_t)); // Security parameters to be used for all security procedures. sec_param.bond = SEC_PARAM_BOND; sec_param.mitm = SEC_PARAM_MITM; sec_param.lesc = SEC_PARAM_LESC; sec_param.keypress = SEC_PARAM_KEYPRESS; sec_param.io_caps = SEC_PARAM_IO_CAPABILITIES; sec_param.oob = SEC_PARAM_OOB; sec_param.min_key_size = SEC_PARAM_MIN_KEY_SIZE; sec_param.max_key_size = SEC_PARAM_MAX_KEY_SIZE; sec_param.kdist_own.enc = 1; sec_param.kdist_own.id = 1; sec_param.kdist_peer.enc = 1; sec_param.kdist_peer.id = 1; err_code = pm_sec_params_set(&sec_param); APP_ERROR_CHECK(err_code); err_code = pm_register(pm_evt_handler); APP_ERROR_CHECK(err_code);}/**@brief Function for initializing the Advertising functionality. */static void advertising_init(void){ uint32_t err_code; uint8_t adv_flags; ble_advertising_init_t init; memset(&init, 0, sizeof(init)); adv_flags = BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE; init.advdata.name_type = BLE_ADVDATA_FULL_NAME; init.advdata.include_appearance = true; init.advdata.flags = adv_flags; init.advdata.uuids_complete.uuid_cnt = sizeof(m_adv_uuids) / sizeof(m_adv_uuids[0]); init.advdata.uuids_complete.p_uuids = m_adv_uuids; init.config.ble_adv_whitelist_enabled = true; init.config.ble_adv_directed_high_duty_enabled = true; init.config.ble_adv_directed_enabled = false; init.config.ble_adv_directed_interval = 0; init.config.ble_adv_directed_timeout = 0; init.config.ble_adv_fast_enabled = true; init.config.ble_adv_fast_interval = APP_ADV_FAST_INTERVAL; init.config.ble_adv_fast_timeout = APP_ADV_FAST_DURATION; init.config.ble_adv_slow_enabled = true; init.config.ble_adv_slow_interval = APP_ADV_SLOW_INTERVAL; init.config.ble_adv_slow_timeout = APP_ADV_SLOW_DURATION; init.evt_handler = on_adv_evt; init.error_handler = ble_advertising_error_handler; err_code = ble_advertising_init(&m_advertising, &init); APP_ERROR_CHECK(err_code); ble_advertising_conn_cfg_tag_set(&m_advertising, APP_BLE_CONN_CFG_TAG);}/**@brief Function for initializing buttons and leds. * * @param[out] p_erase_bonds Will be true if the clear bonding button was pressed to wake the application up. */static void buttons_leds_init(bool * p_erase_bonds){ ret_code_t err_code; bsp_event_t startup_event; err_code = bsp_init(BSP_INIT_LEDS | BSP_INIT_BUTTONS, bsp_event_handler); APP_ERROR_CHECK(err_code); err_code = bsp_btn_ble_init(NULL, &startup_event); APP_ERROR_CHECK(err_code); *p_erase_bonds = (startup_event == BSP_EVENT_CLEAR_BONDING_DATA);}/**@brief Function for initializing the nrf log module. */static void log_init(void){ ret_code_t err_code = NRF_LOG_INIT(NULL); APP_ERROR_CHECK(err_code); // NRF_LOG_DEFAULT_BACKENDS_INIT();}/**@brief Function for initializing power management. */static void power_management_init(void){ ret_code_t err_code; err_code = nrf_pwr_mgmt_init(); APP_ERROR_CHECK(err_code);}/**@brief Function for handling the idle state (main loop). * * @details If there is no pending log operation, then sleep until next the next event occurs. */static void idle_state_handle(void){ app_sched_execute(); if (NRF_LOG_PROCESS() == false) { nrf_pwr_mgmt_run(); }}/**@brief Function for application main entry. */ uint8_t a=0;uint8_t enter=0;int main(void){ bool erase_bonds; nrf_gpio_cfg_input(14,1); // Initialize. uart_init(); log_init(); timers_init(); buttons_leds_init(&erase_bonds); power_management_init(); ble_stack_init(); scheduler_init(); gap_params_init(); gatt_init(); advertising_init(); services_init(); sensor_simulator_init(); conn_params_init(); buffer_init(); peer_manager_init(); // Start execution. NRF_LOG_INFO("HID Keyboard example started."); timers_start(); advertising_start(erase_bonds);//********************************************************************************************* printf("\r\nUART started.\r\n"); NRF_LOG_INFO("Debug logging for UART over RTT started.");//************************************************************************************************ //Enter main loop. for (;;) { idle_state_handle(); if(nrf_gpio_pin_read(14)==1 && flag==1) { enter=0x28; uint8_t *ptr=b; for(int i=0;i 2b1af7f3a8